Xpres SubliJet IQ EPSON Stylus PRO 4880/4450 (Windows Po User Manual download pdf

Quick Start Installation of SubliJet IQ

for the

EPSON Stylus

Pro 4880

IMPORTANT:

Do not install Epson Inks provided with the printer. Please call Sawgrass Technical Support

if you need assistance installing the SubliJet IQ inks.

STEPS FOR INSPECTING SUBLIJET IQ CARTRIDGES FOR LOOSE CHIPS:

INSTALLING SUBLIJET IQ CARTRIDGES:

Rub chip with an eraser to determine

stability of attachment to cartridge.

Note: Use only a

pencil eraser to rub

chip surface to avoid

damaging chip.

1. Check the product package to ensure that the chip

remains attached to the cartridge itself and has not

dislodged in the plastic bag.

2. Determine if the chip is securely attached by tapping

the cartridge a few times on a hard surface, watching

to ascertain that the jolt does not dislodge the chip.

3. Once the cartridge is removed from the bag, rub an

eraser over the surface of the chip, to determine if it

remains stationary within it’s mounting slot. Use of

any item other than an eraser is not advised and can

damage the chip. (See photo @ far right.)

Rotate Cartridge

CHIP LOCATION

& ORIENTATION

If you are replacing existing cartridges because they are empty or low,

please see the following instructions. If not, go directly to step #1.

1.Ensure the printer power is on.

Press the ink compartment cover

to release the latch and open the

cover.

NOTE: The LCD Panel will indicate the ink colors of the original

OEM ink conﬁguration and not the SubliJet ink

conﬁguration. (See Figure # 3 to the right.

When a cartridge is empty or extremely low, “INK OUT” will

display on the LCD panel. Raise the ink levers on either side of the

printer. The cartridge position indicator on the LCD panel will ﬂash

on and off, indicating which cartridge is low or empty. Be sure you

have the correct color cartridge replacement for that position.

Position # 5: Empty

or Extremely Low

4880 Control Panel

5. After approximately 1 minute, ink lever messages will appear on

the LCD panel. The LCD will indicate that the printer recognized

“NON-GENUINE” ink cartridges.

Note: Cartridge label must face left as cartridge is inserted into slot.

4. After all eight cartridges are installed, lower

the ink levers.

2.Raise both ink levers. (Located @ the right side

of each ink cartridge compartment.)

3. Install the ink cartridges into the colorcoded

slots in the order that your system is currently

using, starting from left to right.

1 2 3 4 5 6 7 8

3sec.

NON

NU I N

1 2 3 4 5 6 7 8

3sec.

1 2

EPSON Stylus 1
Pro 4880 1

Summary of Contents

Page 1 - Pro 4880

Quick Start Installation of SubliJet IQ® for theEPSON Stylus® Pro 4880IMPORTANT:Do not install Epson Inks provided with the printer. Please call Sawgr

Page 2

6. Press the down key (V) until a message appears that asks the user whether the ink cartridges are “NON-GENUINE”.1 2 3 4 5

Comments to this Manuals

No comments

Xpres SubliJet IQ EPSON Stylus PRO 4880/4450 (Windows Po User Manual

Browse online or download User Manual for Equipment Xpres SubliJet IQ EPSON Stylus PRO 4880/4450 (Windows Po. Xpres SubliJet IQ EPSON Stylus PRO 4880/4450 (Windows Power Driver Setup): Sublimation Cartridge Quick Start Guide User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Equipment Xpres SubliJet IQ EPSON Stylus PRO 4880/4450 (Windows Po